
Commercial
Code compliance covers life safety. Tenant continuity requires more. The gap between the two is where most commercial outage losses happen.
Commercial
Power That Supports What Tenants Actually Depend On
Code compliance covers life safety. Tenant continuity requires more. The gap between the two is where most commercial outage losses happen.

Overview
Most commercial buildings have backup systems sized to meet life safety code—not to protect tenant operations, revenue, or occupancy.
We help you understand the difference between the system you have—sized for code—and the system your tenants need when the power goes out. Sizing is based on actual load, not square footage. Performance is validated under the demand conditions that actually occur.
Where Commercial Generator Systems Fall Short
Systems sized for life safety only—tenants lose power to refrigeration, IT, and operations
Fuel degradation: generators that sit for months without running develop contaminated fuel
No load testing: 'it turns on' is mistaken for 'it will perform under full building demand'
Transfer switch failures during the transition from utility to generator power
Portfolio inconsistency: some properties are current, others haven't been tested in years
Systems Sized for Tenant Demand, Tested Against Real Building Load
Systems Sized for Tenant Demand, Tested Against Real Building Load
We help you understand the difference between the system you have—sized for code—and the system your tenants need when the power goes out. Sizing is based on actual load, not square footage. Performance is validated under the demand conditions that actually occur.
Requirements
Commercial backup power requirements vary by building type and tenant mix. Life safety systems are mandated. Everything else is a business decision.
Code covers life safety. Tenant continuity requires more. Here's how commercial facilities break down by use type and load.

calculate your power
Know Exactly What It Takes to Keep Power On
From essential backup to full-scale operations—get a clear, grounded recommendation based on how your property actually runs.
CALCULATE YOUR POWER
FAQ
How do I determine the right generator size for a commercial building?
⚡️ Generator sizing is based on actual load demand, not just building size.
Start by identifying:
Life safety systems (required): emergency lighting, fire alarms, elevators
Critical operations: IT, refrigeration, tenant systems
Optional continuity: full or partial building operations
Typical ranges:
Small commercial (retail/office): 20–75 kW
Mid-size buildings: 75–250 kW
Large facilities: 250 kW to 1 MW+
Most systems are sized using:
Peak demand (kW)
Startup loads from equipment
Future expansion needs
Two buildings of the same size can require very different systems depending on how they operate.
Example: 5,000 sq ft restaurant
Refrigeration: 3,000–6,000W
Kitchen equipment (ranges, fryers, ovens): 10,000–30,000W+
HVAC: 5,000–10,000W
Lighting + POS systems: 1,000–3,000W
⚡️ Typical generator need: 40–100 kW
Example: 5,000 sq ft retail store
Lighting: 2,000–5,000W
POS systems + electronics: 500–1,500W
Basic HVAC: 3,000–8,000W
⚡️ Typical generator need: 20–50 kW
Example: 5,000 sq ft office
Lighting: 2,000–4,000W
Computers + servers: 2,000–6,000W
HVAC: 4,000–10,000W
⚡️Typical generator need: 25–75 kW
.png)
CONTACT
Reliable power
doesn’t happen by accident.
Whether you’re planning a new generator, upgrading what you have, or making sure it performs when it counts, we’ll help you get it right.
+123-456-7890


.png)







